Modified Cars

It's a remarkably uncommon BMW M1 "AHG Studie," and you may not be familiar with these.

The 3.0-liter twin-turbo straight-six in the CSL has been upgraded from the conventional 542 horsepower to a far more adequate 692 horsepower.

The factory-modified M2 will debut at the Essen Motor Show.

By installing the four-cylinder turbocharged engine from a Subaru Impreza STI into a 997-generation GT3, a tuner by the name of DevSpeed Motorsports has introduced a novel new approach to Porsche 911 modification.

With two specially constructed widebody VW vans created in partnership with two Southern Californian apparel companies, FB County and The Original Cascade, Kenny Pfitzer Designs hopes to steal the show at SEMA.

Aerodynamic Development Race Optimization (ADRO) claims to be the first business to commercialise an alternative front bumper for the bmw m4.

American tuners increase the GR86's width and downforce.

A 385 horsepower, 6.0-liter V8 engine powers this essentially custom redesign of a bulletproof Mercedes 300CE coupe.

A 503bhp, twin-turbo flat six putting all of its ponies through a six-speed manual transmission to the rear wheels makes this a genuine Porsche 911 Turbo.

This BMW was modified by a German tuning company, and it isn't any more ugly than when it was first built.

The Lexus RX is a reasonable hybrid SUV produced by a smart firm that prides itself on technology and cast-iron dependability.

Although there are many alternatives available when it comes to selecting a "reimagined" or modified vintage Porsche 911, Singer Vehicle Design won't be offering any in the near future.

BMW describes its carbon components for the powerful M3, but those tailpipes are too much for us to handle.

Whatever your opinion of Mansory, you couldn't say the German tuner lacked bravery.

Wataru Kato, the creator of Liberty Walk, has revealed his first new bodykit for 2022.

ABT has unleashed even more power from Audi’s legendary 2.5-liter turbocharged five-cylinder, pushing output to a wild 493 horsepower and 443 lb-ft of torque.

It was created by Polish tuner Carlex Design, and the finished product barely qualifies as subtle.

This M3 Touring is the new MotoGP safety vehicle, as you may have guessed from the stickers, lights, and unique "50 years of M" livery.

Think 720 horsepower in the AMG GT Black Series is enough? RENNtech doesn’t. The U.S.-based tuner is here to push Mercedes-AMG’s track weapon into an entirely new league.

We see no issues at all with employing this Mansory Feroza Edition as a means of transportation for undercover operatives.

As with the Rolls-Royce Ghost the German tuner displayed earlier this week, You'll have seen that this is the Brabus 820 and that it isn't a Mercedes.

Brabus' tuning capabilities are no longer limited to Mercedes-Benz (and Smart) vehicles.

This is the German tuner's take on the Porsche Cayenne Turbo Coupe.

The fastest new Mustang on the market is now even faster. Clive Sutton has announced the updated version of its upgraded Ford Mustang (dubbed the CS850GT) in the UK, which is based on the upgraded Mustang in the US (the Shelby GT500).

For the British Motor Museum’s 'low rides and mellow vibes' event, enthusiasts from around the UK and Europe brought their tuned machines into the iconic Warwickshire venue.

We'd simply want to express that we're huge admirers of Alpina's work throughout the years here at Modified Rides. Not only do they have a wonderful back library, but they also have current models like the Alpina B3.

The Ford GT Holman Moody Heritage Edition is the final special edition Ford GT built to commemorate numerous GT40 racing victories.

Do you require extra gold? There's enough of it in the Manhart Vogue RV 650.

The retro-styled Ultimate is one of Ruf's most sought-after designs. And it is believed that the one you see here is the only one in the United States.

There aren't many people who would consider the current 394bhp Audi RS3 to be lacking in the power department.

You'd be wrong if you believed the GT Black Series would be the most extreme form of Mercedes-Benz AMG's GT sports vehicle.

With the introduction of an outstanding one-off design based on a simple 996 generation 911 Carrera, Porsche has revealed just what is possible with its recently created Sonderwunsch customisation programme.

The Lexus LC Hokkaido Edition will be split evenly between hard-top and drop-top models.

Disappointed that Vauxhall's once-famous VXR performance division appears to have all but died ? Do you like your stylish eighth-generation Astra to have a little more appearance ?

Kahn Design of the United Kingdom took on the task of upgrading the aesthetics of the Ferrari GTC4 Lusso and succeeded spectacularly.

The BMW M4 Competition, with its 3.0-litre twin-turbo straight-six engine producing 503bhp and 479lb ft of torque, is fairly powerful by most people's standards.

Governments are pushing for the removal of internal-combustion engines, and we may see classic cars being phased out at some point.

Last week, the world saw the concept version of BMW's entry for the 2012 Deutsche Tourenwagen Meisterschaft (DTM) series, which is based partly on the existing E92 M3.

This 1976 Chevrolet Corvette isn't exactly what it appears to be.
 

With the full Mansory treatment, the fastest Bentley SUV becomes even faster.

The Ford GT is nearing the end of its production run. Ford spokesman Jiyan Cadiz said in an interview Thursday at the Chicago Auto Show that the 2022 model year will be its final, and car number 1,100 out of 1,350 recently rolled off the assembly line.

Singer presented the Turbo Study on Wednesday, a redesigned Porsche 911 inspired by the Porsche 930 Turbo, which was the company's first attempt at forced induction and was produced from 1975 until 1989.

Kevin Hart, the comedian, is a huge enthusiast of modified muscle vehicles and has commissioned several intricate restomods.
A 1969 Plymouth Road Runner with a menacing theme is the newest addition to his collection.

Sure, it's a "development prototype," but it's mostly a "modified electric drift car.

On 1016 Industries' brand new '3D-printed' Rolls-Royce Cullinan, there's an interesting amount of wheel-arch clearance.